ej 3 speed gear box

Everything else.

ej 3 speed gear box

by trevorbrown » Sun Nov 15, 2020 3:54 pm

I have a 62 ej grey motor with 3 speed crash box which i am having trouble with selecting 1st/reverse. Static, i can select 1st without hassle a dozen times or so, then it gets stuck and i cant select 1st/reverse. I know the selectors have play in them but the 1st/reverse side has a little more play than the 2nd/3rd side. at the gear box the selector coming out of the gear box for 1st/reverse has a bit of slop/play. Is the problem in the linkage or the gear box?
Posts: 1
Joined: Sun Nov 15, 2020 3:43 pm

Re: ej 3 speed gear box

by Harv » Mon Nov 16, 2020 6:18 am

Probably linkage.

Check that the little arms on the box don't have flogged out holes, then adjust linkage as per the workshop manual.

Posts: 510
Joined: Sun May 04, 2014 7:52 am

Re: ej 3 speed gear box

by claysummers » Sat Jan 30, 2021 11:43 am

Had a similar problem with an FB and adjusting the linkage at the steering column sorted it out. In my case I would get second when trying for reverse.

Just a thought, is there any correlation of the problem with engine and gearbox changing temperature? Say the problem occurs as the engine warms up. Then one might suspect an internal gearbox problem.

I would try playing with the linkage first. If doesn’t change things I would try another box if you can get one. That is just me. I don’t mind swapping gearboxes around but never played with internals myself.

Sent from my iPad using Tapatalk
User avatar
Posts: 210
Joined: Thu Jul 28, 2016 12:02 am

Who is online
Users browsing this forum: No registered users and 1 guest