Ej van project

Post up your finished cars or keep a running forum of you progress.

Re: Ej van project

by Spaghettijet » Fri Jan 31, 2020 7:02 pm

Rear bars
Attachments
D9AF9129-A909-4301-9765-1D831CF50C5B.jpeg
D9AF9129-A909-4301-9765-1D831CF50C5B.jpeg (52.68 KiB) Viewed 991 times
 
Posts: 355
Joined: Mon Jan 05, 2015 3:43 pm

Re: Ej van project

by doc1965 » Fri Jan 31, 2020 8:20 pm

Looking good mate getting closer
User avatar
 
Posts: 914
Joined: Sun Apr 13, 2014 1:47 pm
Location: Brisbane

Re: Ej van project

by Spaghettijet » Sat Feb 01, 2020 4:25 pm

Cheers doc,
Today I’m sorting out the fuel pump wiring and connection the fuel lines, fingers crossed no leaks from the high pressure fuel lines!
 
Posts: 355
Joined: Mon Jan 05, 2015 3:43 pm

Re: Ej van project

by doc1965 » Sat Feb 01, 2020 6:40 pm

i kept the Eh original fuel line made a new copy of it and use 5/16 efi hose for the return line back to the tank
I used a fuel pump setup out of a ford laser,they are a great design and to setup in tank and the return line goes back onto the original sender unit suction line
Attachments
PIC_0091.JPG
PIC_0091.JPG (50.92 KiB) Viewed 983 times
User avatar
 
Posts: 914
Joined: Sun Apr 13, 2014 1:47 pm
Location: Brisbane

Re: Ej van project

by 64v8wagon » Mon Feb 03, 2020 2:09 pm

That arse end is looking mighty fine. How long before you are making broom broom noises?
roam wasn't built in a day
 
Posts: 171
Joined: Mon Sep 18, 2017 9:45 pm
Location: Brisbane

Re: Ej van project

by Spaghettijet » Wed Feb 05, 2020 12:01 am

Hmm, I see the good fits of the laser pump 8n original tank. I need to use the commodore unit as it’s sort of calibrated to the commodore instrument cluster, well programmable cluster to sender unit,
Anyhow, heater pipes installed and length it of the wiper motor wires behind the dash was done today, working on seat belt anchor plates and some more wiring tidy up, final installation of pcm BCM and other commodore (redundant) electrical bits needs to happen so the BCM doesn’t have a hissy. Fit when powered up.
Must say it is getting close, although there’s the power steer reservoir to buy and mount, air intake box to mount, accelerator pedal to sort out, cruise control, actuator to mount somewhere etc etc.
 
Posts: 355
Joined: Mon Jan 05, 2015 3:43 pm

Re: Ej van project

by doc1965 » Wed Feb 05, 2020 7:24 am

all the little things left to do and take the longest to finish off and tedious as well
User avatar
 
Posts: 914
Joined: Sun Apr 13, 2014 1:47 pm
Location: Brisbane

Re: Ej van project

by claysummers » Sun Feb 09, 2020 11:54 pm

Rear interior came up well Jason. Looking good.
Cheers
Clay
User avatar
 
Posts: 150
Joined: Thu Jul 28, 2016 12:02 am

Re: Ej van project

by Carpet56 » Mon Feb 10, 2020 8:24 pm

I know you must be chomping at the bit to be on the road. I have followed your efforts for quite a while and it is a credit to you. When i bought my sedan off an old farmer 2 and a bit years ago he had a wagon and a van which was in pieces in the barn. My son in law bought the wagon and i very nearly bought the van as well but i had nowhere to store it. Oh well, the one that got away but at least i can see yours getting done and thats enough for me. Keep up the good work.
Glenn
There is always light at the end of the tunnel,if not turn around it's a cave.
 
Posts: 51
Joined: Sun Jan 07, 2018 11:26 am
Location: Toowoomba

Re: Ej van project

by Spaghettijet » Mon Feb 10, 2020 8:28 pm

Thanks Glenn for encouragement.
 
Posts: 355
Joined: Mon Jan 05, 2015 3:43 pm

PreviousNext

Who is online
Users browsing this forum: No registered users and 10 guests
cron